Also pitched valley gutter linings bs en12588 uses maximum code no.
Chimney back gutter detail.
Over 42 inches please enquire via our contact page.
Flashing or flashings.
Call us with your specific measurements by following our easy measuring guide provided.
A simple solution may be to take a couple of rows of tiles of behind the chimney and were the felt runs under your back gutter slice the felt along the wood thats supporting the lead if that means taking out a few of the thin counter batons so you can slice the felt do it then you can gently lift the felt back and insert a small piece of baton to hold the felt up which should be enough to divert the small amount of water around your chimney.
Chimney flashings back gutters apron and side flashings parapet box and tapered gutters 5 to 8 table 3 sizing guidelines to good practice recommended maximum sizes of individual pieces of lead for the following applications.
Back gutter used where a chimney doesn t exit the roof at an apex and sometimes called a lead tray.
It is installed to ensure that the lead flashing wraps around the tilting fillet and is overlapped by the roofing underlay.
All sizes and roof pitches taken into consideration.
Leadworx back gutter chimney flashings are designed and fabricated to suit any chimney size and orientation using code 4 sheet lead milled to british standard bs en 12588.
Length mm 3.
3a flashings apron and cover.
The back gutter is fitted to carry water from behind the chimney.
The lead gutter lining is then overlapped by the cover flashing of the chimney stack.
This piece of lead as the name suggests acts as a gutter its job is to collect rainwater from the roof behind the chimney and guide it to the sides water then continues its journey down the roof.
Made to measure chimney back gutter details.
Sheet lead back gutters which are part of chimney flashing to suit any chimney and orientation.
Http www justlead co uk peter scholey of just lead shows the fitting of a sheet lead back gutter to a chimney www justlead co uk.
All these items are made from code 4 sheet lead flashing to bs en 12588.
It can be called a lead tray.
Back gutter this is the valley between the roof and the inside side of the stack.
Many of the architectural drawings are designed for the customer to input his own dimensions in the proper form location as that item.
This should move the water from behind the stack to continue to follow down the roof either side of the chimney.
Chimney back gutters 77 52 139 08.
These back gutters are all made to order to ensure you get the best product for your property.